Elevator Parts Elevator Earthquake Sensor Pqm3000 Pqm3001

• After-sales Service: 1 Year
• Warranty: 7*24
• Type: Safety System
• Suitable for: Elevator
• Load Capacity: 1000kg
• Persons: 6-10
• Model NO.: PQM3000 PQM3001
• Speed: 1.00-2.00m/s
• Drive Mode: AC
• Control Type: Microcomputer Frequency Control
• Lift Mechanism: Telescoping Lift
• Use of Occasions: Indoor Type
• Guide Rail: T Guide
• Certificate: ISO, CE
• Power Supply: 24VDC
• Output Signal: Relay Signal
• Weight: 8kg
• Size: 180mm*155mm*89mm
• Transport Package: Cartoon
• Trademark: MACRO
• Origin: China
• HS Code: 8504409990
• Production Capacity: 1000000

Product Description

The elevator seismic monitor is a device used in conjunction with the elevator control system to effectively enable the elevator to enter controlled operation before or when an earthquake occurs. Before an earthquake arrives, the elevator seismic monitor detects seismic waves in advance, and outputs alarm contacts to control the elevator control system to open the elevator door at the nearest floor, releasing the passengers in the elevator, saving the lives of passengers, and ensuring that the elevator equipment is not damaged. damaged. The system mainly has the following advantages:

(1) High-precision, low-noise seismic data collection;

(2) Quickly and accurately judge earthquake events;

(3) Two-level trigger signal output. This instrument has three contact outputs, namely first-level alarm contact output, second-level alarm contact output and fault contact output. Each of them is connected to the elevator-related system for collection of elevator system operation. control signal.

Product Parameters

 

Backup battery	PQM3000 (NO) PQM3001( 24hours )
Input Voltage	DC24V±10%
output signal	3 channels relays
output relay capacity	1.0A 30V DC/  0.5A 125VAC
frequency response	0.1hz-30hz
first class alarm point	0.45m/s3 ~ 0.93m/s3
second class alarm point	0.94m/s3 ~ 1.94m/s3
first class alarm setting threshold rang	0.2m/s3 ~ 1.0m/s3
second class alarm setting threshold rang	0.4m/s3 ~ 4m/s3
acquisition accuracy	0.01m/s3
reset mode	automatic/ manual
alarm records quantity	100 pcs
Power consumption	<5w
working temperature	-10ºC ~ 60ºC
working humility	93% no frost
IP class	IP65
Size	1800mm*155mm*89mm

 

Working principle

 

The product collects ground motion acceleration in the three directions of X/Y/Z during an earthquake to accurately detect the occurrence of an earthquake. When the P wave arrives, the acceleration sensor detects the vibration in the vertical direction in the early stage of the earthquake and outputs the corresponding electrical signal, which is filtered and amplified through The analog-to-digital converter is sent to the microprocessor for corresponding processing. When the S wave arrives, the acceleration sensor detects the vibration in the horizontal direction and outputs a corresponding electrical signal, which is amplified by filtering and sent to the microprocessor through an analog-to-digital converter for corresponding processing.

This instrument has three relay outputs, namely first-level alarm output, second-level alarm output and fault contact output, which are respectively connected to the elevator control operation system for collection by the elevator control system. The first-level alarm output is the output after the instrument detects early P-wave vibration or low seismic motion acceleration. It is a lower-level output and is used to judge that an earthquake may occur. After the first-level alarm relay is activated, if within 10 seconds If the ground vibration signal does not reach the second level alarm, the product will automatically reset and the contact signal will disappear. The secondary alarm output corresponds to the output of higher ground motion acceleration and cannot be automatically reset. Professional elevator operators need to check the elevator and manually reset it after confirming that there is no fault in the elevator.
 

Features

 

1.Advanced design

• Adopt 3-axis acceleration sensor to accurately detect earthquake occurrence, P-wave and S-wave integrated design;

2. Simple installation and convenient debugging

• It is easy to install and maintain. Through the self-learning ability of the instrument, it can work normally without accurately determining the installation position;

3.Multi-level alarm

• Multi-level hierarchical alarm function to avoid false alarms;

4.Alarm value adjustment

• Through the setting software, the equipment alarm value can be adjusted on site;

5.Remote control and storage

• Remote operation and function reset, alarm record storage function available;

6.Self-check

• Self-checking function, the instrument automatically detects and calibrates after a fault occurs, without manual operation;

7.Output signal

• Multiple sets of relay contact output signals to meet different needs of elevator control;

8.Excellent workmanship

• The shell is made of high-quality aluminum alloy material, with beautiful appearance design and certain waterproof and dustproof functions;

9. Uninterrupted power supply

• Effective power supply design, which is powered by external DC24V under normal conditions. In the event of external power outage, it will automatically and seamlessly switch to battery power supply to meet the normal alarm of the equipment under special circumstances;
 

Other Related Products