Usage: | Industrial Communication |
---|---|
Type: | Wired |
Support Network: | Canbus |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
CAN-to-CAN bridge, 1.5KV isolation
2 x CAN: CAN Bridge2
3 x CAN: CAN Bridge3
CAN Bridge2/CAN Bridge3 is a cost-effective industrial class CAN bus bridge repeater, which has 2~3 independent electrically isolated CAN bus interfaces, realizes the relay function of the CAN bus, and can store and forward data between CAN networks of different bit rate. It is widely used in automotive electronics, industrial automatic control, security systems, intelligent instruments and other occasions. Connect PC through USB Type-C interface, and you can easily configure the communication baud rate, ID filtering and ID remapping of each channel.
1. Isolation protection, interference suppression, bus fault analysis and diagnosis;
2. Repeater, network expansion, and change of network topology;
3. Realize CAN network interconnection with different bit rate;
4. Support ID filtering to selectively forward data and control network segment load;
5. Support ID remapping to reassign ID and distinguish devices.
Item |
Min Typical Max |
Supply Terminal USB Current(@24VDC) |
9 24 30 VDC 5 5.5 VDC 23 50 mA |
Ambient temperature operation storage |
-25 25 70 ºC -25 25 85 ºC |
Humidity |
95 % |
Isolation |
1500 VDC |
Bus protection ESD Surge Protection voltage Overcurrent |
3A @ 8kV contact (8/20μs) 2kV 8/20μs (only for CAN Bridge3) 24 V 200 mA |
Bus common range |
-24 24 V |
Bit rate |
5 Kbps 1 Mbps |
Repeat delay capacity |
20μs (@1Mbps) 7500 frame/S(@1Mbps,Standard ID,DLC=8) |
Size |
17.5*113*100 mm |
Installation |
35mm DIN |
Suppliers with verified business licenses